You can use Zscaler Service Entitlement to enroll Device Groups in Zscaler Private Access (ZPA). Configuring ZPA using device groups allows you to assign entitlements and policy settings based on ownership through device posture profiles. For example, one user can have two devices, one personal and one employer-provided. The personal device can be enrolled in ZPA, and the employer-provided device can be enrolled in ZPA and Zscaler Internet Access (ZIA).

To enable ZPA for device groups, you must deploy Zscaler Client Connector 3.9 or later.

Enabling ZPA for Device Groups

To enable ZPA for device groups:

1. In the Zscaler Client Connector Portal, go to Administration.
2. In the left menu, select Zscaler Service Entitlement.
3. Click the Zscaler Private Access (ZPA) tab.
4. To enable ZPA for device groups, ensure that ZPA Enabled by Default for User Tunnel is disabled. If this setting is enabled, ZPA is available for all users and you cannot assign ZPA to a group.
5. Select one or more groups from the Device Groups drop-down menu.

Groups are defined in the Device Groups section in the Zscaler Client Connector Portal under Administration. For more information, see About Device Groups.

6. Click Save.

Your users' devices are updated the next time they connect. If they're already connected, devices automatically update in 60 minutes. Users can manually update their devices in Zscaler Client Connector. On the More page, click Update Policy. After manually refreshing the device, they must reauthenticate on the Private Access page.