icon-zapp.svg
Client Connector

Allow Users to Override Z-Tunnel 2.0 or ZPA Protocol Settings

When you enable Allow end user to override Z-Tunnel 2.0 or ZPA protocol settings, your end users can change the default parameters for Z-Tunnel 2.0 or ZPA protocol settings by browsing to a website. To learn more, see About User Privacy.

Override Z-Tunnel 2.0 ZPA Protocol Settings

Overriding Tunnel 2.0 or ZPA Protocol Settings

Overriding Tunnel 2.0 or ZPA Protocol settings allows you to configure additional settings by browsing to a local configuration website. To override Tunnel 2.0 or ZPA Protocol settings:

  1. Enable Allow end user to override Z-Tunnel 2.0 or ZPA protocol settings in the Zscaler Client Connector Portal.
  2. In your browser, enter http://localhost:9000/zconfig and browse to the website.
  3. On the website, in the Zscaler User Configuration window, configure the following settings:
    • PAC: Enter a link.
    • PROTOCOL: Select Default, DTLS, or TLS.
    • MTU: Select 1200, 1300, 1350, or 1400 for the Maximum Transmission Unit (MTU) value. The default value is 1,500 bytes.
    • DEBUG: Select Enabled or Disabled. This setting determines the status of the log mode in Zscaler Client Connector.
    • LONG RUNNING PACKET CAPTURE: Select Enabled or Disabled. The default running time is 5 minutes.

    • IGNORE KEEPALIVE FAILURE: Select Enabled or Disabled.

  4. Click Save.
Related Articles
About User PrivacyConfiguring Zscaler Client Connector to Collect Device Owner InformationConfiguring Zscaler Client Connector to Collect HostnamesEnabling Packet Capture for Zscaler Client ConnectorConfiguring Automatic Crash Reporting for Zscaler Client ConnectorConfiguring Zscaler Client Connector to Collect ZDX Location InformationAllow Users to Override Z-Tunnel 2.0 or ZPA Protocol SettingsAllowing Non-Administrator Users Access to Zscaler Client Connector Log FilesRestricting Remote Packet Capture