icon-unified.svg
Experience Center

Configuring IP Pool

You can use the default IP Pool which is automatically created, or configure a customized IP pool of IP addresses based on your requirements.

To add an IP pool:

  1. Go to Policies > Access Control > Firewall > IP & FQDN Groups.
  2. On the IP Pool tab, select Add IP Pool.
  3. In the Add IP pool window:
    • Name: Enter a name for the IP pool. Only alphanumeric characters, underscores, hyphens, and periods are allowed.
    • IP Addresses: Enter any number of IP addresses in the following formats.
      • An IP address (for example, 198.51.100.100)
      • A range of IP addresses (for example, 192.0.2.1-192.0.2.10)
      • An IP address with a netmask (for example, 203.0.113.0/24)

You can enter multiple entries. Press Enter after each entry, then click Add Items. For item lists, you can view up to 500 items on a page; filter the list by searching for a word, phrase, or number contained in an item; and remove all items from the list (Remove All) or only items from a specific page (Remove Page). If you select Remove All or Remove Page, a confirmation window appears.

  • Description: (Optional) Enter additional notes or information about the IP pool. The description cannot exceed 10,240 characters.
  1. Click Save and activate the changes.
Related Articles
About Source IP GroupsConfiguring Source IP GroupsAbout Destination IP GroupsConfiguring Destination IP GroupsAbout IP PoolConfiguring IP PoolAbout Network ServicesConfiguring Network ServicesAbout Network Service GroupsConfiguring Network Service Groups